SKYLOTEC Jackpod Davit Instructions D'utilisation page 28

4.4 WINCH, SRL, & ACCESSORY INSTALLATION
Please refer to the Operator's Manual provided with all Skylotec accessories at the time of purchase for
detailed information on the installation of Winches or SRL's onto the Davit System.
If you are using a Skylotec Pro-Series Winch and / or Skylotec Line self retracting lifeline (SRL) with your
Davit System:
-Insert the slotted tube on the back of the winch or SRL into receiver tube mounted on the tripod as shown
in Figure 9a and 9b.
-Depress the 2 opposing buttons on the Sky-Klick connector, and insert the tube until both buttons engage
fully as shown in Figure 9c.
9a
Figure 9, Installation of Jackpod Davit Products Winch / SRL Installation. on davits equipped with the optional SRL
Mounting Anchor Cable as shown in Figures 10 , an SRL may be attached as shown using an approved caribiner.
28
Mount screws with washers and nuts,
then tighten torque to 22 Nm.
9b 9c
EN