Commissioning; Factory Default Settings - Becker Centronic SunWindControl SWC62 Notice De Montage Et D'utilisation

EXPERT MODE
In order to change delay times in the SETTINGS menu, EXPERT MODE must
be set to ON.
You "wake up" the control unit the first time you press the button. Now you can
choose the language with the +/- buttons and apply your selection by pressing
OK. The control unit is in Auto mode.
By pressing the RESET button (with a ballpoint pen or sim-
ilar), the control unit is reset to its factory settings.
Exception: Function, Select Language and Delay Times
menus.
TIME/DATE:
SETTING
FUNCTION:

Commissioning

Factory default settings

Current CET and current date
Threshold value WIND
Threshold value SUN
DELAY
DELAY
END POSITION
SUMMER/WINTER ON
AWNING, DRIVE CONTROLLER, EXTERNAL
SWITCH, ALARM SIGNAL ON, EXPERT
MODE OFF
04
04 and SUN
3 min. (EXPERT MODE ON)
15 min. (EXPERT MODE ON)
03
47 - en