Ec Declaration Of Conformity; Safety Recommendations - SKF TMBH 1 Mode D'emploi

We, SKF Maintenance Products, Kelvinbaan 16,
3439 MT Nieuwegein, herewith declare that the following product:
SKF High Frequency Portable Induction Heater
has been designed and manufactured in accordance with:
EUROPEAN LOW VOLTAGE DIRECTIVE 2014/35/EU, EMC DIRECTIVE 2014/30/EU,
EUROPEAN ROHS DIRECTIVE 2011/65/EU
Nieuwegein, The Netherlands, May 2016
Sébastien David
Manager Product Development and Quality
• Always read and follow the operating instructions.
• The unit is surrounded with a low energy magnetic ield which might cause
interference with sensitive electronic equipment such as pace-makers,
electronic thermometers and wrist watches.
• Make sure the supply voltage does not deviate from the acceptable range of
100 - 240 V, 50 - 60 Hz.
• The equipment should not be used in areas where there is a risk for explosion.
• Do not expose the equipment to high humidity or direct contact with water.
• Never heat to temperatures above 200 °C (392 °F).
• Never disconnect the heating clamp during operation.
• Never modify the heater.
• All repair work should be taken care of by an SKF repair shop.
SKF TMBH 1

EC Declaration of conformity

TMBH 1

Safety recommendations

3