Important Details For Your Information; A Quick Overview For You - SICK LFH Mode D'emploi

Operating Instructions LFH
1. Important details for your information / 2. A quick overview

1. Important details for your information

Read these operating instructions before installing and starting the pressure transmitter. Keep the
operating instructions in a place that is accessible to all users at any time.
The following installation and operating instructions have been compiled by us with great care but
it is not feasible to take all possible applications into consideration. These installation and opera-
tion instructions should meet the needs of most pressure measurement applications. If questions
remain regarding a specific application, you can obtain further information:
Via our Internet address www.sick.com
„
With special model number, please note specifications in the delivery note.
If the serial number on the product label gets illegible (e.g. by mechanical damage or repainting), the
retraceability of the instrument is not possible any more.
SICK pressure transmitters are carefully designed and manufactured using state-of-the-art tech-
nology. Every component undergoes strict quality and environmental inspection before assembly
and each instrument is fully tested prior to shipment. Our environmental management system is
certified to DIN EN ISO 14001.
Use of the product in accordance with the intended use LFH:
Use the pressure transmitter to transform hydrostatic pressure into an electrical signal.
Knowledge required:
Install and start the pressure transmitter only if you are familiar with the relevant regulations and
directives of your country and if you have the qualification required. You have to be acquainted with
the rules and regulations on measurement and control technology and electric circuits, since this
pressure transmitter is "electrical equipment" as defined by EN 50178. Depending on the operating
conditions of your application you have to have the corresponding knowledge, e.g. of aggressive
media.

2. A quick overview for you

If you want to get a quick overview, read Chapters 3, 5, 7 and 10. There you will get some short
safety instructions and important information on your product and its starting. Read these chapters
in any case.
14 © SICK AG • Germany • Subject to change without notice 8013156/U878 /2010-05-01