Storage; Troubleshooting - Cleanmaxx 07023 Mode D'emploi

EN
Cleaning the animal hair fl oor nozzle

Storage

• You can push the telescoping tube together as far as possible and hook the fl oor
nozzle into the bracket on the back of the device for convenient storage.
• Store the vacuum cleaner in a dry, cool indoor room that is not accessible for
children and animals.

Troubleshooting

If the device should stop working properly, fi rst check whether you are able to correct
the problem yourself.
Do not attempt to repair a defective electrical device yourself!
Problem
The vacuum
cleaner has no
suction power.
The suction power
is weak.
The suction nozzles
cannot be attached
properly on the
telescopic tube.
07023_DE-EN-FR-NL_A5_V1.indb 26 07023_DE-EN-FR-NL_A5_V1.indb 26
26
1. Open the cover by pushing the two release buttons on
both sides of the cover and fl ip it open.
2. You can now remove hair, dust etc. from the brush.
3. After cleaning, close the cover. It has to click audibly into
place.
Potential cause/solution/tips
• Is the mains plug not correctly connected with the socket?
Correct the position of the mains plug.
• Is the socket defective? Try another socket.
• Check the fuse for your mains connection.
• Are the fi lters plugged? Clean them.
• Is the auxiliary air valve on the handle open? Close it.
• Is the dust bin too full? Empty the bin.
• Are the fi lters very dirty? Clean them.
• Is the nozzle, telescoping tube or suction hose plugged?
Turn the device off, pull the mains plug out of the socket
and remove the obstruction (also see chapter "Assembly").
• Have you used the animal hair nozzle? When removing the
animal hair nozzle it can happen that the adapter sleeve
remains in place on the telescopic tube. Please note that the
other suction nozzles can only be applied to the telescopic tube
when the adapter sleeve has been removed from the tube!
04.08.2017 10:36:16 04.08.2017 10:36:16