Save the selected ring tone
melody by pressing the mute
button for 3 seconds.
Button assignment
The buttons of the handsfree tele
phone can be used for instance
for establishing internal calls or for
switching and control functions.
All buttons permit double assign
ment (with the exception of the
door release button).
Each button has a bottom
mounted lamp to indicate
switching statuses. For more
details, please enquire with your
electrical installer.
Intercom functionality
For internal communication in the
house, the handsfree telephone
offers additional functions.
To allow these functions to be
used, they must be programmed
by the electrical installer.
• Call forwarding
Forwards door calls to another
telephone.
• Internal group call
Internal call to several telephones
simultaneously.
• Collective announcement
Announcement to several hands
free telephones.
• Automatic call pickup of
internal calls
The handsfree telephone auto
matically picks up incoming
internal calls and switches on the
speech connection.
• Doormatic
The door release is automatically
opened after pressing the door
bell.
• Callback
If an internal caller is unable to get
through to you, he can use the
callback function. The relevant LED
then flashes at your handsfree tele-
phone until you call back.
• Setting an internal callback
If you make an internal call and
the user does not pick up, you can
request a callback. To do this, press
the flashing button twice.
Switching on the monitor
Pressing the monitor button
will show the camera picture from
the door which placed the last
door call. This function is only pos
sible if there is currently no call
connected.
Video memory
The bus telephone is equipped
with a video memory. All visitor
pictures are saved with a date
and time. Up to 28 pictures can
be saved in the device. Once the
memory capacity has been used
up, the oldest picture is over
written each time a new picture is
taken. After a power cut, pictures
saved in the inhouse telephone
are deleted. If the video memory
fails to work, consult your electrical
installer.
Video memory button
If new pictures have been saved,
the video memory button lights up
at the telephone. The last stored
picture is displayed by pressing a
button. Pressing the button again
accesses the next picture.
Assigning the monitor buttons
The monitor is operated using a
5-way button. The Enter key is
used to switch on the monitor or
confirm a selected function. The
control buttons are used for navi
gation within the different menu
levels.
Enter button
The control buttons can be
assigned with different functions
depending on the monitor display.
The functions of the buttons are
indicated by a display superim
posed at the bottom edge of the
monitor.
Control buttons
7