SSS Siedle BFCV 850-0 Notice D'utilisation page 6

English
Accepting door calls
The ringing tones for the front
door and apartment door are dif­
ferent. When a visitor presses the
door bell, the handsfree telephone
rings and the speech button
flashes.
The call can be accepted by
pressing the speech button within
45 seconds after the last ring tone.
During the call, the
speech button is
alight. The call is
ended by briefly pressing the
speech button again. The bus
handsfree telephone only ever
transmits speech in one direction
and switches over automatically. If
the automatic switchover function
does not work due to loud inci­
dental noises at the door station, it
is possible to force switchover of
the speech direction from the
apartment station to the door sta­
tion by pressing and holding down
the speech button in the centre. If
this button is released, speech
direction switches over from the
door station to the handsfree tele­
phone.
Speech volume
During a call, the speech volume
can be set by pressing + or – at
the speech button.
Actuating the door release
When you press the door release
button, the door from which the
last call came is opened for
3 seconds.
Switching on the light
When you press the light button,
the lighting is switched on, pro­
vided this has been connected by
your electrical installer.
6
Muting the bell
When the mute button is
pressed briefly, all the ringing tones
are switched off or on again. The
button lights up red to indicate
that the mute has been activated.
If a visitor rings the doorbell, the
button flashes for as long as the
hands­free telephone is muted.
Dial the door station
Press the speech
button twice to make
a speech connection to the door
station from which the last call
came.
Ring tone volume
The ring tone volume can be set
to 5 different levels:
Hold down the muting button
for 3 seconds to hear the set ring
tone volume.
The volume can be set
by pressing + or – at
the speech button.
Save the selected volume by
pressing the mute button for
3 seconds.
Ring tone melody
You can choose between 11 ring
tone melodies. The ring tone is
always set for the door from which
the last call came.
For this reason, first ring the bell at
the front door or apartment door.
(A different ring tone melody can
also be selected for internal or
group calls).
Press and hold down
the door release and light button
simultaneously for 3 seconds to
hear the set ring tone melody.
Pressing + or – at
the speech button
switches to the next
melody.