Publicité
Les langues disponibles
Les langues disponibles
Introduction
To enjoy your new machine as long as possible, please read
carefully the Operating Instructions and the attached safety
instructions before using it. Further, we recommend keeping the
Operating Instructions to recall the product features in the future.
Within the continuous product development, we reserve the
right to make technical changes to improve it.
Any reprints, even partial, are subject to approval.
This document represents translation of the original
Operating Instructions.
Power tool description (page 6)
1.
Tension knob
2.
Gear box
3.
Belt cover
4.
Engine
5.
Clamping lever
6.
Supports
7.
Stop
8.
Transport wheel
9.
Shelf
10.
Carrying handle
11.
Transport protection
12.
Lever - vice
13.
Lever - pressure
14.
On/Off
15.
Vice
16.
Depth stop
17.
Blade guide
Technical specifications
Voltage/frequency:
Motor output:
Cutting power at square material:
Cutting power at circular material:
Saw band:
Speed:
Weight:
Use as designated
The band saw has been designed for cutting metal, cast iron and
plastic materials. You must not cut wood with the band saw. The
shape of the material being cut must be such that it may be
safely clamped in the machine vice and that it prevents the
material being cut from springing out.
The machine cannot be used for works other than for which the
machine has been designed and that are specified in the
Operating Instructions.
Any other use is a use in conflict with the designation. The
manufacturer will not be liable for any consequential damage
and injuries. Please be sure to know that the machine has not
been designed for industrial purposes.
Operator requirements
The operator must carefully read the Operating Instructions
before using the machine.
Qualification
No special qualification is necessary for using the machine apart
from detailed instruction by an expert.
Minimum age
The machine can only be operated by persons over 18 years of
age. An exception includes youngsters operating the machine
within their professional education to achieve necessary skills
under trainer's supervision.
230 V~50 Hz
370 W
100x150 mm
115 mm
12,7 x 0,64 x 1638 mm
20, 28, 50 U/min.
54,7 kg
Training
Using the machine only requires appropriate instructions by a
professional or reading the Operating Instructions. No special
training necessary.
General safety instructions
Read carefully these Operating Instructions. Familiarise with the
controls and proper use of the machine. Keep the Operating
Instructions for future reference. The warning plates and labels
with instructions attached to the machine provide important
information on safe operation.
Safe work
Use the machine only on a connection with a safety switch
against stray current of 30mA (RCD).
Keep the place of your work clean!
Any mess in the place of your work may result in injuries.
Consider the environment influences!
Do not expose the machine to rain.
Do not use the machine in a moist or wet environment.
Provide adequate lighting.
Do not use the machine near flammable liquids or gases.
Keep other persons in a safe distance!
Do not let other persons, especially children, touch the machine
and the cable. Keep them in a sufficient distance from the place
of your work.
Provide adequate clothing.
Do not wear any loose clothing and jewels. They could get
caught by the moving parts of the machine. Further, we
recommend wearing safety shoes, protective glasses and ear
protectors when working with the machine. Long hair must be
adequately protected.
Store the machine properly!
Machines not being used must be kept in a dry and locked place,
inaccessible to children.
Do not overload the machine!
Work within the specified power range.
Use the right machine!
Do not use the machine for purposes for which it has not been
designed.
Take care of your machine!
Comply with the servicing regulations and instructions.
At regular intervals, check the machine cable and have it
replaced by an authorised professional if damaged.
At regular intervals, check the extension cable and replace it if
damaged. Keep the handles dry, with no oil and grease.
Be careful!
Pay attention to what you are doing. Work reasonably. Do not
use the machine when you are tired.
WARNING!
Using any other accessory equipment may represent a risk of a
serious injury for you.
Watch out for the feeder cable. Do not pull the cable. Do not
use it to pull the plug out. Keep the cable out of reach of thermal
sources, oil and sharp edges.
Have your machine repaired by an expert only!
This machine meets the applicable safety provisions. Any repairs
may only be executed by an expert, using original spare parts;
otherwise, the user could face a risk of injury.
Children and persons not familiarised with the machine and
persons with limited physical, sensory and mental skills must not
use the machine.
Publicité
