LGB 99 7234-0 Instructions De Service page 22

0 = immediate adjustment, 255 = maximum delay.
CV62 Back-EMF: Max. Adjustment
Limits the total adjustment in motor voltage. If there is
a very large load on the motor, the adjustment will not
exceed this value - for more realistic operations, so that
locos will slow a bit on grades.
0 = no adjustment, 255 = maximum adjustment.
CV67 Speed steps programmed by user (see CV29):
bis 28 speed steps are programmed in CV67 to CV94.
CV94 With LGB MTS, every second value is skipped
(14 speed steps).
Factory pre-set speed steps:
7, 9, 11, 13, 16, 20, 24, 28, 32, 36, 42, 48, 54, 60, 68,
76, 84, 92, 102, 112, 124, 136, 152, 168, 188, 208,
230, 255
Pre-set values for user-programmable speed steps:
8, 16, 24, 32, 40, 48, 56, 64, 72, 80, 88, 96, 104, 112,
120, 128, 136, 144, 152, 160, 168, 176, 184, 192, 208,
224, 240, 255
Note:
The speed steps are factory pre-set and programming
is not necessary.
We recommend the 55045 MTS PC Decoder
Programming Module for programming.
Example for Bit programming:
a loco shall run in reverse direction with user-
programmed speed steps, analog operation shall be
possible:
Bit 1 = 1, Bit 2 = 0, Bit 3 = 4, Bit 4 = 0, Bit 5 = 16,
Bit 6 = 0, 1 + 4 + 16 = 21.
Thus, program CV 29 to function value 21.
(0-255) [16]
(0-255) [255]
(0-255)
25