LGB 99 7234-0 Instructions De Service page 19

Spare parts 1
50010 Vaporizing and Cleaning
Fluid
50019 Maintenance Oil
51020 Gear Lubricant
62204 Universal Motor with long
shaft
63120 Brushes with bushings,
8 pieces (2 packages needed)
63218 Standard Pick-Up Shoes,
2 pieces (2 packages needed)
68511 Plug-In Bulb, Clear, 5V,
10 pieces
69184 Traction Tire 46.5mm,
10 pieces
Accessories 2
17010 EPL Loco Magnet
17050 Sound Trigger Magnet
17100 EPL Track Contact
55027 MTS Onboard Decoder III
(24811)
65011 Standing Sounds Power
Supply Unit 68513 Plug-In
Bulb, Clear, 24V
Index
1 = Spare part
2 = Accessories
3 = Switch-off option
4 = See Instructions for
Advanced Users
22
INSTRUCTIONS FOR ADVANCED
USERS
MTS Onboard Decoder
To change the functions of the MTS
Onboard Decoder as desired, config-
uration variables (CVs) can be pro-
grammed in the registers.
This option requires the following
equipment:
- 55045 MTS PC Decoder
Programming Module or
- 55015 Universal Remote Control Unit
Note:
For normal operation, it is not neces-
sary to change any function values.
Programming
Note:
Please consult the operating instruc-
tions for the
- 55045 MTS PC Decoder
Programming Module or
- 55015 Universal Remote Control
Unit
Original factory settings
- If programming results in unsatis-
factory operation, the original fac-
tory settings of the MTS Onboard
Decoder can be recovered for the
most important registers!
- To do this, enter function value 55
in register CV 55.
This also reprograms the loco
address to the factory-set value = 3.
Configuration using a 55015
Remote Control Unit
Procedure:
- Select programming mode
- Enter > "P"
- Display shows "P --"
- Enter > 6 - 5 - 5 and press right
arrow key
- Display shows "P --"
- Enter > 5 - 5 - 5 and press right
arrow key
Note:
The original factory settings have
now been recovered.