Setting The Flash Time; Change Pin; Telephone Answering Machine (Tam) - switel DCT417 Série Mode D'emploi

Setting the flash time

y
D / E
D / E
D / E

Change PIN

y
D / E
D / E
T
T
T
Resetting the phone to its default status
y
D / E
T

10 Telephone Answering Machine (TAM)

Depending on the compression rate* set, the integrated digital answering
machine can provide a total recording time of up to 15 minutes for outgoing
messages and incoming messages. A maximum of 59 incoming messages
can be recorded. Memos recorded for internal purposes are also treated
like messages. The answering machine can be operated from both the
base station and handset. By using a phone which is DTMF−capable, you
also have a PIN protected remote access to the answering machine.
There are two operating modes available for selection:
− outgoing message with message recording
− answer only.
In its default state on delivery, a standard outgoing message is already re-
Press the Menu softkey.
Select BS SETTINGS and press OK.
Select FLASH TIME and press OK.
Select SHORT (100 ms), MEDIUM (300 ms) or LONG (600
ms) and confirm by pressing OK.
Press the Menu softkey.
Select BS SETTINGS and press OK.
Select CHANGE PIN and press OK.
Enter the current PIN (default status: 0 0 0 0) and press
OK.
Enter the new PIN and press OK.
Enter the new PIN again and press OK.
The four−digit PIN protects certain functions from unauthorised
access. If you forget the PIN, please contact our service hotline.
Press the Menu softkey.
Select DEFAULT and press OK.
Enter the current PIN and press OK. Confirm the
subsequent prompt by pressing OK.
The phone book is not deleted. Please delete the phone book
contents using the Phone Book menu. Registered handsets re-
main registered.
105