Maintenance; Replacing The Oil; Cleanliness; Replacement Parts - SKF TMJL 50 Mode D'emploi

4. Maintenance

4.1 Replacing the oil

When replacing the oil or after maintenance, make
sure no air is trapped in the system. This should be
checked before attaching the hose to the application
by making sure only air-free oil comes out of the
hose when pumping.
Only use clean, recommended hydraulic oils.

4.2 Cleanliness

Keep the pump clean from dirt and metal particles
in order to avoid excessive wear.

4.3 Replacement parts

Designation
TMJL 50–1
TMJL 50–2
728245/3A
729831 A
729832 A
729834

4.4 Accessories

Designation
TMJL 100–3
1077587
LHMF 300/5
LHDF 900/5
THGD 100
TMJL 100–5
Items marked * are ONLY for TMJL 50DU.
The contents of this publication are the copyright of the
publisher and may not be reproduced (even extracts) unless
prior written permission is granted. Every care has been
taken to ensure the accuracy of the information contained in
this publication but no liability can be accepted for any loss or
damage whether direct, indirect or consequential arising out of
the use of the information contained herein.
6
EN
Description
Hand-pump (sub-assembly)
Repair kit
Carrying case
Quick connection coupling, G
Quick connection coupling, G
High pressure hose
Description
Gauge connection nipple
Pressure gauge (120 MPa, 100 mm)
Mounting fluid (5 litre, 300 mm
Dismounting fluid (5 litre, 900 mm
Precision digital gauge*
Nipple for digital pressure gauge*
/
1
4
/
1
4
2 /s at 20 °C)
2 /s at 20 °C)