General Settings; Language Selection; Time Stamp; Date Format / Time Settings - Minox DTC 700 Mode D'emploi

select the menu item „Video output". Confirm
your selection with OK (9). In the Sub­menu, which
opens, you can select „Deactivate" or „Activate"
with the Up/Down arrow keys (10). Confirm your
selection with OK (9). If you select „Activate", you
can set the speed of the video with the Up/Down
arrow keys (10). The higher the FPS (frames per se­
cond) selected, the faster is the speed of the video.
The setting is saved by pressing the OK button (9).
Use the left arrow key to return to the higher menu
without changing the settings. If you select „Deac­
tivate" and confirm with OK (9), the images will be
not be produced as a video.
Selecting „Deactivate" in the „Time lapse" menu
and confirming this with OK (9) switches off the
time lapse function.
Note: DTC 700 will continue to respond to mo­
vement if the time lapse is activated.
Note: When the „Video output" option is acti­
vated, all the individual images will continue to
be saved to the SD card.

General Settings

Language Selection

Please proceed as follows to change the language
settings on your DTC 700:
1. Bring the main switch (11) in the switch setting
to the "SETUP" mode.
2. You will be immediately directed to "Manual
Control" of the camera,
3. Now press the menu button (8). You will get to
the "Main Menu" of the camera.
4. Then press the arrow key to the right (10) to
change over to the "General Settings"
5. Now press the arrow key (10) pointing down­
wards.
6. You are now in the highlighted menu option
"Language".
7. Press the OK button (9).
8. Using the Up and Down arrow keys (10), choo­
se the language (highlighted) of your choice
9. Press the OK button (9).
34
10. The camera will now have saved the langua­
ge you select and you will again be led to the
"Main Menu". You will return to the previous
menu selection by pressing the left arrow key
(10) without affecting the settings.

Time Stamp

This setting allows you to archive and display
details like date, time, and temperature as "time
stamp". Go to the "Main Menu"by pressing the
menu button (8) and select the menu option "time
stamp". It is located under the second tab "General
Settings". You can access the submenu by pressing
the OK button (9) or the right arrow key (10), Under
this menu option you can choose between "On"
(Display time stamp) or "Off" (Do not display the
time stamp). Press the OK button (9) to save the
setting and return to the menu option "General
Settings". You can access the previous menu option
by pressing the left arrow key (10) without chan­
ging the settings.
Date format / Time
(Menu option "Settings")
This function allows you to set up the display format
for date and time. Go to "Main Menu" by pressing
the menu button (8) and select the menu option
"Settings". It is located under the second tab "Ge­
neral Settings". You can access the submenu by
pressing the OK button (9) or the right arrow key
(10). You can program the settings for date, time,
date and time format (12 or 24 hours) using the
Up/Down arrow key (10). Use the left and right ar­
row key (10) to access the option you would like to
activate. Press the OK button (9) to save the settin­
gand you will return to the menu option "General
Settings". Press the menu button (8) to have the
same effect as saving with OK (9). Even here, the
settings last saved will be accepted and you will
be returned to the menu option "General Settings".
Note: Activate the moon phase calendar by entering
precise information. The image of the moon phase
will appear on every picture or video clip.