Technical Data; Specified Conditions Of Use; Emergency Procedure - Güde GKS 190 Traduction Du Mode D'emploi D'origine

Technical Data

Mitresaw
Art. No
Service connection
Rated input
No-load speed
Saw blade dia. x hole dia
Max. Cutting depth at
Mitre 0°/ Bevel 0°
Mitre 45°/ Bevel 0°
Mitre 0°/ Bevel 45°
Mitre 45°/ Bevel 45°
Inner diameter – suction nozzles
Weight
Noise details
Sound pressure level L
Sound power level L
Measured according to EN 61029; Uncertainty K = 3 dB (A)
Wear ear protectors!
Read and understand the operating
instructions before using the
appliance. Familiarise with the
control elements and how to use the appliance
properly. Abide by all the safety measures stated in
the service manual. Act responsibly toward third
parties.
The operator is responsible for accidents or risks to
third parties.
Persons over 16 years of age can only work on the
appliance. An exception includes youngsters trained
in order to reach knowledge under supervision
of the trainer during occupational education.
In case of any doubts about connection and operati-
on refer please to our customer center

Specified Conditions Of Use

The mitre saw can be used for sawing solid wood,
bonded wood, glued veneer, materials similar to
wood, aluminium profiles, Non-ferrous metals and
plastics.
Stock having a round or irregular cross section (such
as firewood) must not be cut, as it can not be securely
held during cutting. When sawing thin stock layed on
edge, a suitable auxilary fence must be used for firm
support.
Do not use this product in any other way as stated
for normal use. Not observing general regulations
in force and instructions from this manual does not
make the manufacturer liable for damages.
Gehrungskappsaege_54993_54997_1-0.indd 21
pA
WA
GKS 190
54993
230 V~50Hz
800 W S1
5500 min
-1
190 x 30 mm 24 Z 120 x 30 mm 24 Z
45 x 110 mm
45 x 80 mm
15 x 110mm
15 x 80mm
35 mm
4 kg
90,8 dB (A)
104 dB (A)
It is strictly prohibited to disassemble, modify
and purposely remove the protective equipment on
the unit and fit other protective equipment instead.
Even when the device is used properly and all safety
regulations are complied with, there still may be
some residual risks.
• noise emissions
• dust emissions
• vibrations to hand and arms
• Danger of burns
Tool and workpiece heat up during operation.
• Risk of injury
Sharp tools and workpiece edges

Emergency procedure

Conduct a first-aid procedure adequate to the injury
and summon qualified medical attendance as quickly
as possible. Protect the injured person from further
harm and calm them down. If you seek help, state the
following pieces of information: 1. Accident site, 2.
Accident type, 3. Number of injured persons, 4. Injury
type(s)
ENGLISH
21
GKS 210 A
54997
230 V~50Hz
1200 W S1
5200 min
-1
55 x 120 mm
38 x 120 mm
55 x 85 mm
38 x 85 mm
35 mm
4,8 kg
90,8 dB (A)
104 dB (A)
23.07.15 11:56