Troubleshooting; Technical Specifications; Compliance - Buffalo G789 Mode D'emploi

Telephone Helpline: 0845 146 2887 (United Kingdom)

Troubleshooting

If your BUFFALO appliance develops a fault, please check the following table before making a call to the
Helpline.
Fault
Sausage meat does not come
out of nozzle
Pusher does not fit in cylinder
The handle won't turn
Air pockets in sausages

Technical Specifications

Model Capacity
G789 5 litres

Compliance

BUFFALO parts have undergone strict product testing in order to comply with
regulatory standards and specifications set by international, independent, and federal
authorities.
BUFFALO products have been approved to carry the following symbol:
All rights reserved. No part of these instructions may be produced or transmitted in any form or by any means,
electronic, mechanical, photocopying, recording or otherwise, without the prior written permission of BUFFALO.
Every effort is made to ensure all details are correct at the time of going to press, however, BUFFALO reserve the
Probable Cause
Blockage in nozzle
Pusher seal not properly
attached to pusher
Pusher seal the wrong way
round
Pusher seal damaged
Gears/teeth jammed
Blockage in pusher valve
Output (with handle and nozzle)
5kg approx.
right to change specifications without notice.
Clear blockage
Relocate seal
Ensure the 'open' end of the seal
faces the rear of the appliance
Replace pusher seal
Change gear and turn handle
backwards and forwards to try and
clear blockage
Clean rack teeth
Retract pusher and clear valve
Dimensions
h x w x d mm
310 x 740 x 200
UK
Action
Weight (empty)
10.5kg
4