Inspection; Care; Plastic Parts - Vermeiren INOVYS Mode D'emploi

GB
•
APPROX. EVERY 8 WEEKS
Depending on the frequency of use lubricate the following parts lightly:
-
-
-
•
APPROX. EVERY 6 MONTHS
Depending on the frequency of use check the following:
-
-
-
l
Only authorised individuals are entitled to perform measures for exchanging components or
making repairs/renovations. Kindly contact your specialist dealer.
l
Use only original replacement parts, which are available from the manufacturer via your
dealer.

INSPECTION

In principle we recommend one inspection every twelve months, and a minimum of one before usage
is resumed. All of the following checks must be performed and documented by authorized persons:
•
Check the frame parts for three-dimensional deformation and reduced functioning.
•
Visually check for damage to the paintwork (risk of corrosion)
•
Check the operation of the wheels (free running, level rolling, axle play, tyres, profile, condition of
the rims, air pressure (in the case of pneumatic tyres), floating axles, etc.)
•
Check the solidity and seating of all screws
•
Verify the amount of grease on the metal joints of moveable parts
•
Visually check all plastic parts for tears and brittle spots
•
Check the functioning of the armrests and leg supports (locking, loading, deformation, wear and
tear due to loading, adjustment levers)
•
Check the functioning of the gas pressure springs and rope pulls (kinks, foreign bodies), levers
and adjusting screws. If necessary, adjust the rope pulls using the adjusting screws.
•
Check the functioning of the removable parts (e.g. tip protector, headrest, safety belt, accessory)
•
Verify completeness of the delivery condition
•
Is the instruction manual available?
Have the service confirmed in the service plan only when at least the above-mentioned aspects have
been checked. If your specialist dealer is incapable of performing the required services, please contact
the manufacturer. We shall gladly refer you to authorized specialist dealers in your area.
l
The manufacturer is not liable for damage caused by the lack of or improper inspection.

CARE

Your multi-function wheelchair requires regular care if you want it to be visually attractive also. Please
take note of the following hints:
•
COVERS
Clean the covers with a cloth moistened with hot water. You may remove stubborn dirt by taking off
the cover and washing it with a mild commercial detergent. Stains can be removed by using a sponge
or a soft brush. Do not use any sharp-edged objects for cleaning SOFT covers.
l
Do not use strong cleaning liquids like solvents, nor use hard brushes.
l
We shall decline all liability for damage caused by the use of inappropriate cleaning agents.
•

PLASTIC PARTS

Clean all plastic parts of your wheelchair with commercial plastic cleaners. Please comply with special
product information.
Movable parts of the arm rest mechanism
Bearings of the brake levers
Movable parts of the footrests
Cleanliness
General condition
Function of the steering wheels (If the rotation resistance is too great, clean the
bearings of the steering castors. If this is insufficient, please consult your specialist
dealer.)
18
INOVYS
12/2008