Specifications - Vermeiren INOVYS Mode D'emploi

COMPONENTS OF THE WHEELCHAIR
10
5
8
13
1
14
NOTE TO DEALER:
When you receive the goods, please check that the product supplied is complete and fully functional.
Warranty claims are only valid if the manufacturer (supplier) is notified in writing within a period of two
weeks. In the case of any defect that is not immediately evident, warranty claims are only valid if the
manufacturer (supplier) is notified in writing within two weeks after it is detected. We shall remedy
defects in the manner of our choosing - either by carrying out a repair or by providing a replacement.

SPECIFICATIONS

(given in fully assembled condition and as standard equipment)
Total length
Total length (without leg supports)
Total width
Seat width
Height of backrest
Total height
Adjusting seat height
Seat cushion
Seat depth
Height of armrests
Total weight
Seat angle
Angle of backrest
Max. nominal load
Tyre pressure front wheels *
Tyre pressure rear wheels *
Colour of frame
Cover
*
Tyre pressure given is for standard tyres. If using tyres made by another manufacturer, please refer to the tyre cover for
details of the pressure.
6 7
4
3
9
12
2
43.31 in.
31.50 in.
23.62 in.
15.75 in.
19.69 in.
40.55 in.
17.72 in – 20.47 in
3.15 in.
16.54 in – 18.50 in
7.48 in – 11.02 in
Approx. 81.57 lb
Approx. 21°
Approx. 35°
Nominal load 297.62 lb
Max. 2.5 bar
Max. 3.5 bar
C55
Soft grey
We reserve the right to introduce technical changes. Tolerances +/- 0.59 in/kg, 1.5°
5
SCOPE OF DELIVERY
(Standard equipment)
1. Back wheels (24 x 1⅜)
2. Front wheels (8 x 1¾ ) or (8 x 1¼)
11
3. Basic frame
4. Seat frame
5. Back rest
6. Armrests
7. Seat cushion
8. Pushing handles
9. Parking brakes
10. Head rest
11. Leg supports
12. Front wheel bracket
13. Floating axles
14. Anti-tipping device
25.59 in.
17.72 in.
INOVYS
12/2008
27.56 in.
19.69 in.
GB