Table Des Matières; Using The Device For The First Time; Inserting The Batteries; Setting The Date And Time - Microlife BP W3 Confort Mode D'emploi

Table of Contents
1. Using the Device for the First Time
• Inserting the batteries
• Setting the date and time
2. Checklist for Taking a Reliable Measurement
3. Taking a Blood Pressure Measurement
• How not to store a reading
• How do I evaluate my blood pressure?
• Appearance of the Pulse Arrhythmia (PAD)
4. Data Memory
• Viewing the stored values
• Memory full
• Clearing all values
5. Battery Indicator and Battery change
• Low battery
• Flat battery - replacement
• Which batteries and which procedure?
• Using rechargeable batteries
6. Error Messages
7. Safety, Care, Accuracy Test and Disposal
• Safety and protection
2
• Device care
• Cleaning the cuff
• Accuracy test
• Disposal
8. Guarantee
9. Technical Specifications
Guarantee Card (see Back Cover)

1. Using the Device for the First Time

Inserting the batteries

After you have unpacked your device, first insert the batteries. The
battery compartment 5 is on the bottom of the device. Insert the
batteries (2 x 1.5 V, size AAA), thereby observing the indicated polarity.

Setting the date and time

1. After the new batteries are fitted, the year number flashes in the
display. You can set the year by pressing the M-button 3. To
confirm and then set the month, press the time button 4.
2. Press the M-button to set the month. Press the time button to
confirm and then set the day.
3. Follow the instructions above to set the day, hour and minutes.
4. Once you have set the minutes and pressed the time button, the
date and time are set and the time is displayed.