Important Safety Instructions - Televes Avant3 Mode D'emploi

Launch Amplifier Avant3

Important Safety Instructions

Important safety instruccions
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with a dry cloth.
7. Do not block any ventilation openings. Install in accordance
with the manufacturer's instructions.
8. Do not install near any heat sources such as radiators, heat
registers, stoves, or other apparatus (including amplifiers)
that produce heat.
9. Do not defeat the safety purpose of the polarized or
grounding-type plug. A polarized plug has two blades
with one wider than the other. A grounding type plug has
two blades and a third grounding prong. The wide blade
or the third prong are provided for your safety. When the
provided plug does not fit into your outlet, consult an
electrician for replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched
particularly at plugs, convenience receptacles, and the
point where they exit the apparatus.
11. Only use attachments/accessories specified by the
manufacturer.
12. Use only with the cart, stand, tripod, bracket, or table
specified by the manufacturer, or sold with the apparatus.
When a cart is used, use caution when moving the cart/
apparatus combination to avoid injury from tip-over.
13. Unplug this apparatus during lightning storms or when
unused for long periods of time.
14. Refer all servicing to qualified service personnel. Servicing
is required when the apparatus has been damaged in any
way, such as power-supply cord or plug is damaged, liquid
has been spilled or objects have fallen into the apparatus,
the apparatus has been exposed to rain or moisture, does
not operate normally, or has been dropped.
Warning
Reduce the risk of fire or electric shock, do not expose this
apparatus to rain or moisture.
Apparatus shall not be exposed to dripping or splashing and
no objects filled with liquids, such as vases, shall be placed
on the apparatus.
Safe operation
Power requirements for this product are 196-253V~ 50/60
Hz.
Should any liquid or object fall into the equipment, please
refer to qualified personnel for service.
To disconnect the equipment from the mains pull the plug
never the cable.
It is strongly recommended not to connect the equipment
to the mains until all connections have been done.
Do not connect the equipment to the mains until it has been
screwed to the wall.
The socket outlet shall be installed near the equipment and
shall be easily accessible.
Do not take the cover off the equipment without
disconnecting it from the mains.
Safe installation
Ambient temperature should not be higher than 45°C.
Do not place the equipment near heat sources or in a highly
humid environment.
Do not place the equipment in a place where it can suffer
vibrations or shocks.
Please allow air circulation around the equipment.
Do not place naked flames, such as lighted candles on or
near the product.
Simbology
Equipment designed for indoor use.
This symbol indicates that the equipment complies
with the safety requirements for class II equipment.
The equipment complies with the CE mark
requirements.
The product is EAC certified.
Caution, risk of electrical
shock.