Televes Avant3 Mode D'emploi page 17

Analog/digital programmable headend amplifier
intended for both single-dwelling as multi-
dwelling installations, characterised by the
following: ease of installation, expandable,
friendly-user programming, automatic gain control
(AGC), external programming unit and low power
consumption.
It features 5 filters (F1 to F5) to be distributed by
software between its 2 UHF programmable inputs.
It can be selected the number of filters per each
UHF input (5-0 and 2-3), which will be performed
as a function of channels received by each antenna.
U1: 5
U2: 0
F1 F2 F3 F4 F5
U1: 5
U2: 0
F1 F2 F3 F4 F5
U1: 5
U2: 0
F1 F2 F3 F4 F5
LTE
UHF1
LTE LTE
U1: 2
UHF1
U2: 3
F1 F2
U1: 2
U2: 3
F1 F2
UHF1
U1: 2
U2: 3
F1 F2
LTE LTE
The assignment of filters per each input is carried
out by means of the PCT programmer.
In every filter it can selected any channel, from 21
to 60, with a selectable bandwidth between 1 and
7 TV channels within the UHF IV band.
LTE LTE
F1 F2 F3 F4
F1 F2 F3 F4
max. 7CH
F1 F2 F3 F4
max. 7CH
max. 7CH
These inputs feature an automatic powering
system that cut itself when an over consumption
occurs.
The unit also has a mixing output for UHF channels
(21 - 60) which is used to expand the number of
filters available by incorporating additional Avant3
units to the headend.
UHF1 UHF2
UHF1 UHF2
UHF1 UHF2
LTE
UHF2
UHF2
F3 F4 F5
F3 F4 F5
UHF2
F3 F4 F5
UHF
UHF
UHF
The signal available at this output depends on the
configuration chosen for inputs.
Input configuration 5-0:
LTE LTE
LTE LTE
Input configuration 2-3:
LTE LTE
LTE LTE
LTE LTE
LTE LTE
The system also features a VHF broadband input
within the frequency range 174 -406 MHz.
LTE LTE
LTE LTE
The FM input is configured by means of a switch
BI-FM located on the rear.
LTE LTE
All UHF programmable filters (F1 to F5), feature an
AGC system that keeps constant the output level
regardless input signal fluctuations.
LTE LTE
17
L
EN
L
LTE LTE
L