How To Use The Programmer - Televes Avant3 Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

How to use the programmer

**
*
The channels set above channel 60, will
not appear in the output.
** The functions relating to programming
the VHF filter, as well as for powering
preamps through this input, do not apply
to this product.
PCT firmware
version
------------
V:x.xx
After connecting the programmer to the Avant3, it
sends the parameters with which it is configured
(input configuration, filter settings, ...). During this
process, the programmer displays its version of SW
Prodotto
for a while. The screen appears as follows:
firmware
versione:
V:x.xx
CT firmware
version
-----------
:x.xx
roduit
irmware
ersion:
:x.xx
*
PCT firmware
version
------------
V:x.xx
Unit
firmware
version:
V:x.xx
PCT firmware
version
------------
V:x.xx
It then displays the SW version of the Avant3, also
briefly:
Produit
firmware
version:
V:x.xx
PCT firmware
version
------------
V:x.xx
Next, it will be displayed the main menu first
option.
Laitteen
ohjelmisto
versio:
V:x.xx
PCT firmware
version
------------
V:x.xx
Unit
firmware
version:
V:x.xx
19
EN
PCT firmware
version
------------
V:x.xx
Laitteen
ohjelmisto
versio:
V:x.xx

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

532740

Table des Matières