GreenWorks Tools GD40LM46 Manuel D'utilisation page 5

EN
DE ES IT FR PT NL RU FI SV NO DA PL CS SK SL HR HU RO BG EL AR TR HE LT LV ET
To adjust the blade height
■ To raise the blade height, grasp the height
adjustment lever and move it toward the back of the
mower.
■ To lower the blade height, grasp the height
adjustment lever and move it toward the front of the
mower.
OPERATION
Do not allow familiarity with products to make you
careless. Remember that a careless fraction of a
second is sufficient to inflict serious injury.
Always wear eye protection. Failure to do so could
result in objects being thrown into your eyes resulting
in possible serious injury.
Do not use any attachments or accessories not
recommended by the manufacturer of this product.
The use of attachments or accessories not
recommended can result in serious personal injury.
Always inspect mower for missing or damaged
parts and blade for damage, uneven, or excessive
wear prior to use. Using a product with damaged or
missing parts could result in serious personal injury.
■ Do not tilt the lawn mower when starting the engine
or switching on the motor, unless the lawn mower
has to be tilted for starting. In this case, do not tilt
it more than absolutely necessary and lift only the
part which is away from the operator.
■ Do not start the engine when standing in front of the
discharge chute.
■ Do not put hands or feet near or under rotating
parts. Always keep clear of the discharge opening.
For complete charging instructions, refer to the
operator's manual for the battery packs and chargers
listed in the specifications section.
TO INSTALL BATTERY PACK
See figure 8.
■ Lift and hold up the battery door.
■ Align the battery with the mower's battery port.
English (Original Instructions)
WARNING
WARNING
WARNING
WARNING
■ Insert the battery into the left battery compartment
to start the mower. This mower is equipped with
a battery storage compartment which offers a
convenient place for storing your battery when not
in use, or to store an extra battery pack to extend
your run-time.
■ Make sure the battery release button snaps in place
and that battery is fully seated and secure in the
mower before beginning operation.
■ Insert the battery key.
■ If the machine is not going to be used immediately,
do not insert the battery key
■ Close the door.
TO REMOVE BATTERY PACK
See figure 8.
■ Release the power lever to stop the product.
■ Open the battery door to access the battery
compartment.
■ Remove the battery key.
■ Press the battery release button on the battery. This
will cause the battery to raise out of the tool slightly.
■ Remove battery pack from the product.
STARTING/STOPPING THE MOWER
See figure 9.
■ Press and hold the safety lock-out button.
■ Pull the power lever upward to the handle to start
the mower and release the safety lock-out button.
■ To stop the mower, release the power lever.
NOTE: A high-pitched noise and sparking may occur as
the electric motor decelerates. This is normal.
SELF-PROPELLED MOWING
See Figure 9.
To engage the self-propelled feature:
■ Open the battery door.
■ Insert the battery.
■ Insert the battery key.
■ Pull the self propel lever upward to meet the handle.
To disengage the self-propelled feature:
■ Release the self propel lever.
To adjust the speed of self-propelled feature:
■ Pull the variable speed control lever towards the
Rabbit Symbol to increase speed.
■ Push the variable speed control lever towards the
Turtle Symbol to decrease speed.
3