Chain Counter Setting Menu - MZ electronic WHC040 Instructions D'utilisation

Chain counter setting menu

Hold down the
to access the instrument setting menu. The
following page will appear on the display:
Use the (DOWN) and
move around the menu options.
Once you are positioned on the item to be modified press the
choice.
Use the (DOWN) or
Once one is positioned on the parameter press the
According to the type of parameter, using the
reduce/increase the value of the same or disable/enable the function.
Once the modification has been performed, press the
Using the (DOWN) key go to the Exit option and press the
the setting menu. The same procedure must be used to return to the main page.
Working mode menu
Use the (DOWN) or
Mode
Selects the working mode:
•
Windlass (WND)
•
Capstan (CAP)
WHC040
(ON) key for six seconds
(UP) keys to
(UP) keys to move from one parameter to another.
WORKING MODE
MODE
EXIT
(UP) key to move around the parameters.
MENU
WORKING MODE
MEASURE
FUNCTIONS
SETTINGS
SENSOR
CAN
(ON) key to confirm your
(ON) key to enable modification.
(DOWN) and (UP) keys it is possible to
(ON) key to confirm.
(ON) key again to return to
CAP
Select with
Change with
Confirm with
22
English
Rev. 02-2021