MZ electronic WHC040 Instructions D'utilisation page 26

Test
This function allows you to check the correct
operation of the tachometer sensor: a screen
with the status of the sensor is displayed: by
rotating the winch, the contact must close
when the mangete passes in
correspondence with the sensor, closing it.
Exit
To return to the previous menu.
Test menu
Use the (DOWN) or
LCD Test
This function switches on all the display's
pixels thus making it possible to perform a
check on them.
Software Version
Indicates the version of the software installed.
Work Hours
Indicates the hours of operation of the winch.
Exit
To return to the settings menu.
WHC040
Confirm with
TESTS
LCD TEST
SOFTWARE
WORK. HOUR
EXIT
(UP) key to move around the parameters.
Select with
Confirm with
Confirm with
SENSOR
1.0
0
26
English
Rev. 02-2021