Operation And Use; Product Maintenance; Maintenance Tips; Technical Data - Niko 10-496 Manuel Technique

3. OPERATION AND USE

If everything has been connected correclty and the system is connected to the mains,
the yellow LED on the power supply lights. You can see the image from the flush mount-
ing camera on the video monitor (see resp. user manuals 10-555 / 10-556 / 10-560 /
10-586 / 10-590).
Adjust the sharpness of the image by turning the camera lens.

4. PRODUCT MAINTENANCE

By means of the following maintenance tips we want to ensure that the surfaces of these
products are not damaged by improper use. Damage by improper use is not covered by
the guarantee.

Maintenance tips

- It is sufficient to clean the products with soap and a damp cloth.
- You are strongly advised not to use any of the following:
- abrasive sponges or abrasive detergents
- maintenance products containing solvents or acids, or cleaning products containing
acetic acid
- high pressure cleaner.

5. TECHNICAL DATA

- dimensions 10-496: ................. see fig. 1
- dimensions 10-896: ................. H 82 x W 78 x D 12 mm
- weight 10-496: ........................ 100 g
- weight 10-896: ........................ 115 g
- temperature range: ................... -20 to 50 °C
- cover: ...................................... synthetic (black)
- operating voltage: ..................... 18 to 28 Vdc
- output impedance: .................... 100 Ω (symmetrical)
- input current:............................ 35 mA (26 V)
- sensor:..................................... CMOS
- resolution horizontal: ................. 380 video lines
- image width: ............................ 3.6 mm, 100° horizontal, 80° vertical
- light sensitivity: ......................... 0 lux at F2.0 (IR on)
- electronic shutter: ..................... 1/50...1/100 000
- protection degree: .................... IP20
EN
10-496 / 10-896
21