2.2. Installation flush surround plate
The camera module can be covered with a flush surround plate as desired. Mount the flush
surround plate as such, that no condensation or rainwater can seep through.
Tip: To simplify installing the camera module, use a Niko flush surround plate (10-896).
You can fix the flush surround plate and the camera module to the fixing plate by means
of a handy screw system (fig.7).
Note: for a solid installation, the fixing plate can be max. 5mm thick.
a. Installation opening
For a successful installation of the flush surround plate and camera module, the opening
in the fixing plate has to be 63mm wide and 73mm high.
b. Flush surround plate + dimensions (fig.5 and 6)
61
The flush surround plate consists of two parts that are mounted on both sides of the
fixing plate.
EN
fig.5
fig.6
10-496 / 10-896
19