Short Description; Intended Use - Niko 10-35 Serie Information De Produit

10-35x
WARNING! Fatal electric shock.
When working on installations functioning on an alternating current at 230 V, please observe safety regulations in accordance with the
statutory laws, regulations and rules.
When positioning bus installations, please observe the general safety regulations for tele-communications equipment in accordance with
the statutory laws, regulations and rules.
3.2. Protection against lightning strikes
ATTENTION! Damage to the device due to overvoltage.
Provide adequate protection against lighting strikes so that the voltage on the connections is never above 32 V DC.

4. SHORT DESCRIPTION:

4.1. Intended use

The flush-mounting sets (10-35x) can be equipped with the functional modules separately.
Other installations must at least meet the requirements of protection degree IP44.
4.1.1. Flush-mounting set (10-35x)
The flush-mounting sets consist of front plates and flush-mounting cassettes. These serve to flush mount functional modules.
4.1.2. Risks of intended use
The operating elements of the modules in the external units can get very hot when placed in the sun (more than + 50°C). When mounting, choose a location
where direct sunlight is kept to a minimum.
The producer is not liable for applications other than the ones foreseen or applications which exceed the intended use.
5. MODULE ARRANGEMENT
5.1. Flush-mounting positions for modules in an external unit
More detailed information about the different modules can be found on the product data sheet Functional modules, online under the product planning section
and in the relevant product information of the different modules.
Function group with audio module
(Functional modules with 1 to 4 FIs)
10-360 Audio module
10-362 Display-module, 3 keys, 256 FIs
10-363 Code lock module (in keypad module)
Access control
10-363 Code lock module
10-364 Transponder reader module
Extra module
10-361 Dome camera module
10-365 House number /information module
10-366 Blank module
* Recommended mounting height: fingerprint scanner min 1.30 m and camera module min. 1.60 m.
34
Using a vertical arrangement ...
...the modules are combined as follows:
Audio module (top))
Display module (below or next to audio module)
Code lock module or scroll wheel (below or next to dis-play module)
Using a vertical arrangement ...
below keypad, dial, bell push button and
lighting module or stand-alone
Using a vertical arrangement ...
above loudspeaker, audio module
and below house number /information module
always placed at the top
flush-mounting as liner, reserve
EN