Niko 10-496 Manuel Technique page 16

10-496 / 10-896
Read the complete manual before attempting installation and activating the
system.
1. DESCRIPTION
The Niko Access Control camera module is designed for flush mounting into a wall. The
camera module is available with a colour camera (10-496). This camera can be used in
combination with the door loudspeaker for flush mounting 10-880-02 and extension 10-881-01.
The use of the flush surround plate from the Niko Access Control range protects the lens
and simplifies mounting the camera module. The flush surround plate is available with an
aluminium frame (10-896).
2. INSTALLATION
Check whether the following components are present:
- camera module designed for flush mounting
- flush surround plate (optional)
Which cables are required?
Niko recommends the following:
- JYSTY(-F2) 3 x 2 x 0,8mm
- TVVF (-F2) 3 x 2 x 0,8mm
- TPVF 3 x 2 x 0,6mm (Limits the number of components to be connected. For specifications,
see technical catalogue Niko Access Control).
Tip: Use the same colour code for identical terminals (a, b, P...) for all the Niko Access
Control products in one system!
2.1. Installation flush mounting camera
a. Dimensions camera module in mm (fig.1)
Ø18
fig.1
16 EN