Edit Chase (Add A Scene Into Chase); Delete A Scene In A Chase; Delete A Chase; Delete All Chase Programs - Nicols C 1216 Manuel D'utilisation

User manual
3.3.6 EDIT CHASE (INSERT SCENE INTOACHASE)
Action :
1) Press and hold the PROGRAM button to enter programming mode.
2) Press the desired CHASE button.
3) Press the TAP SYNC DISPLAY to switch the LED display to steps view.
4) Use the BANK UP/DOWN buttons to navigate steps and locate the insert point of the new scene. The
display will read the step number.
5) Press ADD button to prepare the insert.
6) Use the BANK UP/DOWN button to locate the SCENE.
7) Press the SCENE button that corresponds to the scene to be inserted.
8) Press ADD button to insert the scene. All LEDs will blink.

3.3.7 DELETE A SCENE IN A CHASE

Action :
1) Press and hold the PROGRAM button to enter programming mode.
2) Press the desired CHASE button that contains the scene to be deleted.
3) Press the TAP SYNC DISPLAY button to switch the LED display to steps.
4) Select the scene/step to be deleted using the BANK UP/DOWN buttons.
5) Press AUTO DEL button to delete the step/scene. All LEDs will blink.

3.3.8 DELETE A CHASE

Action :
1) Keep pushed the CHASE button (1~6) to be deleted then clic AUTO/DEL

3.3.9 DELETE ALL CHASE PROGRAMS

CAUTION! This procedure will result in irrevocable loss of chase step memory.
The individual scenes and program banks will be preserved
Action :
1) Keep controller On, then Press and hold the AUTO DEL button while turning ON the controller.
3) Release buttons then turn On contrôler.
C 1216
26