SKYLOTEC GET UP Instructions D'utilisation page 15

thus your safety. Clean the product with a brush
under running cold water of domestic supply. If the
stains persist, clean it in warm water (maximum
30°C) with ordinary detergent. Then rinse thoroughly,
wipe it with a towel and dry naturally in a shaded
ventilated place away from sources of heat. If
needed, lube sparingly the moving joints of the cam
with silicon based oil.
Temperatures
While it is allowed to use this product within the
temperature range from -40 °C to 80 °C, it is
advisable to stock it in a dry place at room
temperature.
Lifetime
Lifetime is set by the date of production and is
theoretically unlimited. Service time starts with the
date of first use and depends on frequency and
mode of application, on environment where it is used
(e.g. marine, cave, corrosive atmosphere), and on
mechanical wear and damage. It is therefore very
difficult to determine the expected service time of a
particular device. Its due retirement is therefore left
to user's regular examinations and competent
person's annual inspections.
Guarantee and its limitations
This product is guaranteed for 3 years from purchase
against any faults in materials and manufacture. The
guarantee does not apply in cases of misuse, normal
wear and tear, unauthorized modifications or
alterations, improper use, improper maintenance,
accident, negligence, damage, or if the product is
used for a purpose it was not designed for. If you
discover a defect, you should return the product to
the reseller you purchased the product from or
directly to SKYLOTEC.
SKYLOTEC is not responsible for the consequences
of direct, indirect, accidental or any other type of
damage resulting from the use of its products.
MAT-BA-0205-00_20190911_in_Bearbeitung_new_sizze.indd 15 MAT-BA-0205-00_20190911_in_Bearbeitung_new_sizze.indd 15
15 15
22.04.2020 09:45:06 22.04.2020 09:45:06