Steinberg Systems SBS-PF-300/50 Mode D'emploi page 6

7. C key: It is used for canceling the set up unit price.
8. . key: DECIMAL POINT key is used for set the decimal position of unit price.
9. M*(*=1,2, etc) key: it's for withdrawing the unit price that stored. when put ob-
ject on platform, and press one key of them, the unit price and relevant total pri-
ce will be displayed on screen.
10. STORE key: to save the unit price by M*. press STORE firstly, the unit price will
show you "o", then you can input the digits that you wanted, and press M*(*=1,2,
etc.), after that, the price has been stored.
MAINTENANCE
1. Battery
The battery must be recharged properly after use of the scale when unit price
window show "-Lb-". Normally charge for 1.2hours for each use of 1 hours of
scale. If it is not used for long time, please charge it continuously at least for
24hours after 3months,otherwise it will cause damage to battery.
2. Common Trouble Shooting
EN
10
Following chart will show you the common trouble shooting.
Trouble Instruction
AC lamp is not Power may not be
glowing connected
Scale is not There is no DC
turning on with power supply to
battery the Scale
Over voltage Over Voltage
LED glows,
Alarms and auto-
matically turn off
Weight reading is Over voltage
unstable or affected by
moisture
Mögliche Ursache Problemlösung
• The mains • Insert the power
plug may be plug or replace it
disconnected. if damaged.
• The power • Change the pow-
cable is dama- er cable.
ged.
• The storage • Ensure the con-
battery is nections are in
damaged good condition.
• The battery • Repair by quali-
connection are fied technician.
not proper
Battery is in use • Charge the
for too long time battery
• Or repair by qua-
lified person
Insufficient voltage • Tested or
OR use of battery repaired by quali-
is prolonged even fied technician.
after the warning
alarm OR too
much humidity in
surrounding.
11
EN