Programming Method Parameters - Radiometer Analytical TitraLab TIM840 Guide D'utilisation

Programming method parameters

1. Go to the last Edit method screen.
2. Enter the parameters. The parameters displayed will all depend on
the measurement type and mode selected.
Press 1:
3.
To enter the Method parameters: general parameters
concerning the electrode and reagent (when required) used by the
method and the titration parameters.
4. Press 2:
To enter the Sample parameters: concerning the sample amount
analysed.
5. Press 3:
To enter the Results parameters defining the results and
stoichiometric coefficients for the chemical reaction (if required).
6. Press 4:
To enter the Printouts: parameters defining the analysis report to
be printed.
Programming guidelines
61