Programming Reagent Parameters - Radiometer Analytical TitraLab TIM840 Guide D'utilisation

Programming reagent parameters

1. If Titre = Calibrated, enter the reagent definition parameters and
go to the last Edit method screen.
2. Press 1:
To enter Calibration parameters: general parameters used during
the calibration.
3. Press 2:
To enter Standard parameters concerning the standard solution
used for the calibration.
4. Press 3:
To enter the Results parameters concerning stoichiometric
coefficients for the chemical reaction (if required).
5. Press 4:
To enter Printouts parameters defining the calibration report to be
printed.
Programming guidelines
57