Create An Electrode - Radiometer Analytical TitraLab TIM840 Guide D'utilisation

Create an electrode

1. Press 4 Electrode Library, then 1 New electrode.
2. Press  in the Function field and select the function of the
electrode, refer to the table below:
Electrode type
pH single
pH combined w/wo temp. sensor
Single metal/redox
Combined metal/redox w/wo temp. sensor mV (i=0)
ISE single
ISE Combined w/wo temp. sensor
Reference single
Temperature sensor
Ground metal
Double metal
3. Press  in the ID field.
4. Select Other in the From field.
The option From = Catalogue allows you to create an electrode
from a list of Radiometer Analytical electrodes.
5. Enter the identification (ID) of the electrode, (up to 16 characters).
6. Press 1 twice.
48
Chapter 3
Select function
pH
pH
mV (i=0)
mV (i=0)
mV (i=0)
Reference
T°C
Ground
mV (i > 0)