Programming Electrode Parameters - Radiometer Analytical TitraLab TIM840 Guide D'utilisation

Programming electrode parameters

1. If Calibrate request = yes, enter the electrode definition
parameters and go to the last Edit electrode screen.
2. Press 1:
To enter Calibration parameters: general parameters used during
the calibration,
3. Press 2:
To enter Calibration solutions parameters concerning the
standards used for the calibration,
4. Press 3:
To enter the Results parameters concerning acceptation criteria
that you can set on the results.
5. Press 4:
To enter Printouts parameters defining the calibration report to be
printed.
Programming guidelines
53