Edit Method Screen - Radiometer Analytical TitraLab TIM840 Guide D'utilisation

Edit method screen

1. Press 5 Method library.
2. Press , select the method to be edited from the list then press 2
Edit method.
3. Edit the necessary parameters.
a. Select the method mode. The modes available are:
• Measurement (pH, mV or mV at imposed current)
• End point (titration to a preset mV or pH end point)
• Coupled (methods chained in a same beaker)
• Continuous IP (Inflection point detection with continuous addition
of the titrant)
Programming guidelines
59