Create A Reagent - Radiometer Analytical TitraLab TIM840 Guide D'utilisation

Create a reagent

1. Press 5 Reagent library then 1 New reagent.
2. Press  in the New reagent screen.
Select From = Other.
3.
The option From = Catalogue allows you to create a reagent from
a list of Radiometer Analytical reagents.
4. Press  in the ID field and enter the reagent name (up to 16
characters).
5. Enter the "approximate" titre of the reagent (5 characters) in the
Target titre field.
6. Enter the units (mM, M, mN, N) indicated on the reagent bottle.
Use the following: mM = mmol/l, M = mol/l, mN = meq/l or N = eq/l).
Note: If molar units are selected (mM or M), it is necessary to
enter the stoichiometric coefficients for the chemical reaction in the
Results screen.
For info: once the units have been confirmed, they are added to
the reagent ID and target titre.
7. Press 1 twice to create the reagent.
8. Edit the reagent parameters (see next page).
54
Chapter 3