Cell Window - Radiometer Analytical TitraLab TIM840 Guide D'utilisation

Cell window

Use the RIGHT arrow key to move to this window.
1. Title bar: indicates the name of the window.
2. Internal stirring: command stirrer On/Off.
3. Speed: select the internal stirring speed, from 100 to 1100 rpm by
steps of 50 rpm.
4. Cell tab: animated icon indicates when the magnetic stirrer or
propeller is operating.
Apply internal stirring
1. Select Internal stirring = ON,
3. Press  in the field Speed and select a stirring speed.
Apply external stirring
1. Connect the Stirring Propeller, part no. 847-731, to the Titration
Manager. Line 1 is automatically replaced by
External stirring.
2. Select External stirring = ON.
3. Adjust stirring by turning the stirring propeller knob. You can
consult the corresponding table between the position (1 to 9) and
the stirring speed by pressing  in the field Speed setting.
38
Chapter 2
1
2
3
4