Toggle Between Weight Units" Menu; Structure; Navigating The Menus; Installation - Sartorius Entris BCE Mode D'emploi

4.4.2 "Toggle Between Weight Units" Menu Structure
Navigating in menus (see Chapter 4 .5, page 15) .
t
Level 1 Description
Unit 1 - unit 4 Define the displayed weight unit and the
resolution for the 1st to 4th convertible
unit .
4.5

Navigating the Menus

Procedure
To open the main menu: Press the [Menu]
t
button .
To display menu items or parameters of a
t
level: Press the [Up] or [Down] button .
To return to the next higher menu level or
t
exit the menu: Press the [Back] button .
To open a displayed menu level or a
t
displayed parameter: Press the [Confirm]
button .
5

Installation

5.1

Scope of Delivery

Item
Device
Weighing pan
Pan support
Power supply unit with country-specific
adapters
Draft shield
For models with analytical draft shield:
Dust cover
Operating instructions
5.2

Selecting an Installation Site

Procedure
Ensure that the following conditions are met at the
t
installation site:
Condition Characteristics
Ambient conditions − Suitability tested (for ambient
conditions, see Chapter 15 .1, page
36)
Setup surface − Stable, even surface with little
vibration
− Sufficient space for the device
(for space requirements, see Chapter
"15 .9 Device Dimensions",
page 39)
− Sufficient load bearing capacity for
the device (for device weight, see
Chapter "15 .10 Metrological Data",
page 40)
Access to parts Convenient and safe
relevant to
operation
Entris ®
Installation
Quantity
1
1
1
1
1
1
1
BCE Operating Instructions 15