HumanTechnik lisa Mode D'emploi page 11

Congratulations on purchasing your
RF blink lamp. We hope it will give
you many years of reassuring operati-
on. You have purchased a modern
and reliable system.
Please read through these operating
instructions carefully. They tell you
how to set up the system correctly
and explain all the system's features
to you.
Standard components
Please check if all following compo-
nents are included:
- RF blink lamp
- rechargeable battery
- 12 V plug-in PSU
- Stand
- Operating Instructions
- Warranty card
If any parts are missing please imme-
diately contact your dealer or the
manufacturer directly.
Functional principle
The RF blink lamp receives signals
from a variety of radio transmitters
and converts them into light signals.
The RF blink lamp has a very high-
power light-emitting diode (LED),
which brings a signal to the user's
attention, and additional LEDs which
indicate the nature of the incoming
signals.
Setting up the system
1a. Inserting the rechargeable
battery
There is a battery compartment on
the back of the RF blink lamp. Open it
by sliding the cover of the battery
compartment to the right of the recei-
ver using your thumb. Connect the
battery plug with the outlet, insert the
rechargeable battery into the com-
partment and close the device. When
the battery is connected, the recei-
ving signals may be triggered once.
Life of rechargeable battery, per char-
ge: approx. 1 - 2 days*
1b. Operation with a 9 V battery
The RF blink lamp can also be operated
using a regular 9 V block battery, which
is widely available. Open the battery
compartment as described in 1 1 a a .
Connect the battery to the connector
plug and insert the battery into the
battery compartment. Close the devi-
ce.
Life of 9 V block battery: approx. 1 - 2
weeks*
* at 5 events per day
English 11