USER SETTINGS
ACCESS
You access to user settings in 3 steps:
From Auto, Comfort, Eco or Frost protection mode :
Information
1
display
auto
auto
1
Press for 5
seconds
mode
mode
Setting sequence:
Backlighting
Eco mode temperature lowering-level
Boost duration
Maximum ambient temperature
BACKLIGHT SETTING
1- Three modes can be set:
L1
= Temporary backlighting: Backlight of the display when a
button is pressed or during occupancy detection.
L2
= Non-stop backlighting: Backlight of the display all the time.
L3
= Temporary backlighting: Backlight of the display when a
button is pressed.
L3 mode is the default setting.
Press
or
to choose the setting you require.
auto
auto
mode
mode
2- Press
to save and move to the next setting.
auto
auto
mode
mode
To exit the user settings, press
SE
TTING THE ECO MODE TEMPERATURE
LOWERING-LEVEL
The drop in temperature is set at -3.5°C compared to the set tempera-
ture of the Comfort mode. You can adjust the lowered level from -1°C to
-8°C, by intervals of 0.5°C.
Important: whatever the lowering level set, the Eco setting tempera-
ture will never exceed 19°C.
2
prog
prog
boost
Press briefly
twice
OK
OK
Frost protection temperature
Temperature unit
prog
prog
boost
OK
OK
prog
prog
boost
OK
OK
twice.
User
Information
display
auto
auto
prog
prog
boost
1
OK
OK
mode
mode
Comfort setting temperature limit
3- Press
or
to obtain the temperature level you require.
auto
auto
mode
mode
4- Press
to save and move to the next setting.
auto
auto
mode
mode
To exit the user settings, press
SETTING THE FROST PROTECTION
TEMPERATURE
Your device is preset at 7°C. You can adjust the Frost protection
temperature from 5°C to 15°C, by intevals of 0.5°C.
5- Press
or
to obtain the temperature you require.
auto
auto
mode
mode
6- Press
to save and move to the next setting.
To exit the user settings, press
EN
3
= User settings
auto
auto
prog
prog
boost
Press briefly
OK
OK
mode
mode
prog
prog
boost
OK
OK
prog
prog
boost
OK
OK
twice.
prog
prog
boost
OK
OK
twice.
Maximal
12