RADSON Flores C E Notice D'utilisation page 6

7 DAY AND DAILY PROGRAMME
In this mode, you have the option of programming your device, by
setting one of the five programmes on offer for each day of the week.
Access to the programming mode
From Auto, Comfort, Eco or Frost protection mode, press
seconds to enter into the programming mode.
Schematic sequence of programming settings:
Setting time
Setting day and time
In this mode, you can set day and time to program your device in line
with your needs.
1- From Auto, Comfort, Eco or Frost protection mode, press
seconds.
The cursor moves to the setting day and time mode.
auto auto
1
mode mode
2- Select using or . The two hour figures will flash.
The hours will scroll quickly, if you press the
them.
Save by pressing .
auto auto
1
mode mode
1
3- The two minute figures will flash.
Select using or .
Save by pressing .
auto auto
1
mode mode
1
4- The cursor above the number 1 (which represents the Monday) will
flash. Select the date using
Save by pressing .
auto auto
1
mode mode
Programmes
Setting day
choice
prog prog
boost
OK OK
5 sec.
or
prog prog
boost
OK OK
2
prog prog
boost
OK OK
2
or .
prog prog
boost
OK OK
1 2
5- To change and/or allocate programmes press
the time and day mode, press
Choices programmes
Schematic sequence of programmes:
Comfort
or 5
The device is delivered by default with the self-learning mode enabled
as described on page
have nothing more to do, the device, after the initial 7 day learning
period will follow the autoprogramme which will continue to tailor
itself to your occupancy cycles.
Programmes overview
- Auto: Auto-programming (See Automatic programming with selflear-
ning process page
for 5
- Comfort: your device will operate in Comfort mode, 24 hours a day, as
regards each day selected.
Note: You can set the Comfort mode temperature to the temperature
you require (see the Setting the Comfort mode temperature section
page 6).
- Eco: The device will operate 24 hours a day in Eco mode.
Note: You can set the temperature-lowering parameters
- P1: your device will operate in Comfort mode from 06:00 to 22:00 (and
in Eco mode from 22:00 to 06:00).
- P2: your device will operate in Comfort mode from 06:00 to 09:00 and
from 16:00 to 22:00 (and in Eco mode from 09:00 to 16:00 and from
22:00 to 06:00).
- P3: your device will operate in Comfort mode from 06:00 to 08:00,
and hold
from 12:00 to 14:00 and from 18:00 to 23:00 (and in Eco mode from
23:00 to 06:00, from 08:00 to 12:00 and from 14:00 to 18:00).
Potential modifications of programmes
If the default time schedules for the P1, P2 and P3 programmes does not
suit your routines, you can change them.
Modifying the P1, P2 or P3 programmes.
If you modify the time schedules for the P1, P2 or P3 programmes,
the schedules will be modified for all the days of the week for which P1,
P2 or P3 had been set.
1- If you just set the time and day, go to step 2.
From Auto, Comfort, Eco or Frost protection mode, press
seconds.
When the cursor moves above the setting time symbol
shortly.
2- Press or
3 times.
Eco P1 P2
7. If this programme suits your requirements, you
6).
auto auto prog prog
1
OK OK
mode mode
. The cursor moves above prog.
auto auto prog prog
1
OK OK
mode mode
EN
. To exit the setting
P3
(see page 12).
for 5
, press
boost
boost
6