RADSON Flores C E Notice D'utilisation page 7

3- With or , select P1.
P1 will flash. Press for 5 seconds to make changes.
auto auto
1
mode mode
4- The P1 start time (which by default is 06:00) will flash.
Using or , you can change this time, by increments of 30
minutes.
auto auto
mode mode
Save by pressing .
5- The P1 end time (which by default is 22:00) will flash. Using
, you can change this time, by increments of 30 minutes.
auto auto
mode mode
1
Save by pressing .
6- Press to exit the programming Mode and return to Auto Mode.
Note: without action on the keys, it will return to Auto after a few mi-
nutes.
Choices and allocation programmes
Prior information:
display area
auto auto prog prog
2
1- If you just set the time and day, the cursor moves automatically un-
der PROG.
mode mode
From Auto, Comfort, Eco or Frost protection mode, then press
for 5 seconds. When the cursor positionned under the set time sym-
bol , press again.
The days of the week are all displayed. The default program Auto
Program, see page 6) appears on the display.
auto auto
1 2 3 4 5 6 7
mode mode
prog prog
boost
OK OK
2
1
5 sec.
prog prog
boost
OK OK
1
2
prog prog
boost
OK OK
2
Correspondence days /numbers
Monday
Tuesday
Wednesday
Thursday
Friday
Saturday
boost
Sunday
OK OK
prog prog
boost
OK OK
2- Press or .
The programme set for day 1 (1= Monday, 2 = Tuesday, etc.) will
flash.
3- Chose the programme you want for this day with
Save by pressing
4- The programme assigned to the second day of the week (Tuesday)
or
will flash.
Repeat the procedure described previously (in point 3) for each day
of the week.
5- Once you have chosen a programme for each day, confirm your selec-
tion by pressing
display with the programmes that you set for them (P1, P2, P3, CONF
or ECO).
To exit the Programming mode, press
Viewing the programmes that you have selected
- From Auto, Comfort, Eco or Frost protection mode, press
1
seconds. Press
2
(Comfort, Eco, P1, P2 or P3) will scroll on display in front of you.
3
4
- To exit the programme viewing mode, press
5
6
Manual and temporary exemption from a running
7
programme
This function allows you to change the setting temperature tempora-
rily until the next scheduled change in temperature or the transition to
0:00.
Example:
(Auto
1- The device is in Auto mode, the running programme is Eco 15,5°C.
auto auto prog prog
boost
1 2 3 4 5 6 7
OK OK
mode mode
.
auto auto prog prog
boost
1
OK OK
mode mode
1
auto auto prog prog
boost
1
OK OK
mode mode
. The days of the week will successively scroll on
twice.
twice, the programme for each day of the week
twice.
auto auto prog prog
boost
3
OK OK
mode mode
EN
or .
2
for 5
7