Configuration Of Detection Modes; Dual Optimization Feature; Pin Code Lock - RADSON Flores C E Notice D'utilisation

CONFIGURATION OF DETECTION MODES

Open window detection, activation/ deactivation of
the Auto mode
The automatic mode enabled is the default setting.
auto auto
mode mode
1- Press or .
On
= automatic mode enabled.
O FF
= automatic mode disabled.
auto auto
mode mode
2- To save and move automatically to the next setting, press
To exit the user settings, press
Occupancy detection, activation/deactivation
1- The occupancy detection enabled is the default setting.
2- Press or .
ON
= occupancy detection enabled.
OFF
= occupancy detection disabled.
auto auto
mode mode
3- To save and move automatically to the next setting, press
exit the user settings, press

DUAL OPTIMIZATION FEATURE

Overview
- Dual function optimization, priority to comfort or energy savings,
the choice is yours: Depending on various parameters: room inertia,
ambient temperature, desired temperature, the device calculates and
optimizes the programming for each heating period whether set to
Comfort or Savings (Eco):
- In OPTI ECO mode (efficiency priority), the devices inbuilt algo-
rythmes will calculate the best compromise in order to guarantee
maximum energy savings throughout the programmed increase and
decrease phases.
In this mode, a slight drop in the temperature level at the beginning
and end of the comfort period is allowed to maximize energy savings.
- In OPTI COMFORT mode (priority to comfort), the device intelligence
prog prog
boost
OK OK
prog prog
boost
OK OK
3 times.
prog prog
boost
OK OK
3 times.
calculates the best compromise in order to guarantee maximum
comfort during the programmed increase and decrease phases.
In OPTI COMFORT mode, the priority is given to anticipating and
maintaining the comfort temperature during periods of detected oc-
cupancy.
Optimization choice
The OPTI COMFORT mode is activated by default.
OPTI
The word will appear briefly on the display then it will alternate
CONF
with the set mode
auto auto
mode mode
1- Press or .
C ONF
= Optimisation feature activated for OPTI COMFORT mode,
priority to comfort.
E CO
= Optimisation feature activated for OPTI ECO mode, priority
to energy efficiency.
O FF
= Optimisation feature disactivated.
.
2- To save and move automatically to the next setting, press
To exit the user settings, press

PIN CODE LOCK

Overview
Your heating device is protected by a safety code against nonauthorised
use. The PIN code (Personal Identity Number) is a
customisable 4 numbers code. When enabled, it prevents access to the
following settings:
- Selecting the Comfort mode : The access to the Comfort mode is
forbidden, only the Auto, Eco and Frost protection modes are available.
- Minimum and maximum Limits of the setting temperature range (the
Comfort temperature modification is forbidden out of the authorised
. To
setting range).
- Programming mode.
- Open window detection settings.
- Occupancy detection settings.
- Optimization choice.
- Setting the Eco mode temperature lowering-level.
- Setting the Frost protection temperature.
3 important steps are needed for the first use of the PIN code lock:
1 - PIN code initialisation, enter the preset PIN code (0000) to access to
the feature.
2 - Activation of the PIN Code to lock settings which will be protected
by the PIN code.
3 - Customizing the PIN code, replace 0000 by the custmized code
ECO OFF
, or .
prog prog auto auto
boost
OK OK
mode mode
auto auto prog prog
boost
OK OK
mode mode
3 times.
EN
prog prog
boo
OK OK
.
15