Special Machine Scaling Functions; Litre Counter; Resetting Washing Cycles; Resetting Machine Parametres - Nuova Simonelli Microbar Mode D'emploi

8. SPECIAL MACHINE
SCALING FUNCTIONS
8.1 RESETTING THE
CLEANING FILTER

LITRE COUNTER

This function allows you to reset the total amount of
water used.
Proceed as follows:
• Release voltage by turning the main switch off
(OFF).
• Reinstate voltage by turning the main switch on
(ON) and pressing down on the key:
until the display reads
8.2 RESETTING WASHING
CYCLES
This function makes it possible to reset the total
number of washing cycles.
Proceed as follows:
• Release voltage by turning the main switch off
(OFF).
• Reinstate voltage by turning the main switch on
(ON) and pressing down on the key:
until the display reads
8.3 RESETTING MACHINE
PARAMETRES
This function makes it possible to remove incorrect
functioning data and to reinstate the Standard
Programming settings (see PRESET SETTINGS
chart).
Proceed as follows:
• Release voltage by turning the main switch off
(OFF).
• Reinstate voltage by turning the main switch on
(ON) and simultaneously pressing down on the keys
66
7
5
ENTER
1
and RESET
3
until the display reads:
8.4 HANDLING MANUAL
COFFEE DELIVERY
GROUP
This function makes it possible to activate the motor
manually forming the automation of the manual cof-
fee delivery group. Proceed as follows:
• Release voltage by turning the main switch off
(OFF).
• Reinstate voltage by turning the main switch on
(ON) and simultaneously pressing down
on the arrow keys and ;
until the display reads:
IMPORTANT: When the machine is switched
on, since the arrow key is used
to access this site, the piston will
automatically start to move down-
wards.
• Press the arrow key  to move the piston
DOWNWARDS.
• Press the arrow key 
UPWARDS.
• Release and reinstate voltage using the main
switch to end the procedure.
EN
;
4
2
4
to move the piston
2