Agilent Technologies TwisTorr 305 FS Notice De Mode D'emploi page 238

8 Technical Information
Inlet screen installation
To fix the fan to the TwisTorr 305 FS case execute the following procedure (see the
following figure):
1
2
3
Figure 31
238/258
Fix the fan kit to the suitable bracket by means of the furnished screws
Fix the bracket to the pump body.
Connect the cooling fan connector to the appropriate supply port which is present
to the eletronic controller that drives the pump.
Mounting the fan on the bracket
TwisTorr 305 FS User Manual / 87-901-057-01 (A.00)