Motor Commissioning; Inserting The Drive Batteries - Reely Hydro Force Notice D'emploi

9.

Motor Commissioning

a) Inserting the Drive Battery
Open the body cover.
The drive battery (1) must be attached to the bottom of the body with hook-and-loop tape so that it will be kept secure
in its position even in rough operation
The battery should be mounted as close to the motor holder (2) as possible for best running properties.
Observe tight fit of the rechargeable battery. We recommend that the battery be attached to the wood board
with an additional strip of hook-and-loop tape taped into the boat body, rather than only those present.
The material required for this is not part of the delivery and must be procured separately.
Figure 5 also shows the plug-in connection between the drive controller and the rechargeable battery (3).
Figure 5
41