Contrast; Version Fw; Adjust; Language - Ravelli MIA 90 Manuel De L'utilisateur

Press the key
"confirm"
to enable the function.
After following the procedure above step by step, you can set the following functions:
Settings > Contrast
Press the key
"confirm" to
access the
SETUP
SETTINGS
Use the UP/DOWN keys to change
contrast setting and obtain a better visualisation
of the information shwon on the handheld set.
The value can vary from 0 to 100. 50 with respect to
the standard value.
Settings > Firmware version
Press the key
"confirm" to
access the
SETUP
SETTINGS
By pressing the following button you will confirm the data and switch to the page within the SETTINGS menu.
SETTINGS.
Settings > Adjust
Press the key
"confirm" to
access the
SETUP
SETTINGS
Use the UP/DOWN keys to change the value read by
the room temperature probe
installed inside the handheld set, with respect to a ref-
erence value. The value can vary from -10°C to 10°C.
The standard value is 0°C.
Settings > Language
To access the next setting, follow the steps given above or simply remove and replace the batteries. The device resets and prompts
you again to select the language you want to set.
User manual MIA 90
By repeadely pressing the
key ou will go back to the
"STAND BY" page
Press the key
"selection" to switch
to the function

CONTRAST.

Press the key
"selection" to switch
to the function
CONTRAST.
Press the key
"selection" to switch
to the function

VERSION FW.

On the home page, instead of the room temperature de-
tected and settable, the message OFF t. ext appears if the
room where the thermostat is installed has not yet reached
the required temperature, or the message ON t.ext if the
room temperature is reached.
Press the key
"confirm"
to access the function
By pressing the following button you will confirm the
data and switch to the page within the SETTINGS
menu.
Press the key
"confirm"
to access the function
Press the key
"confirm"
to access the function
By pressing the following button you will confirm the
data and switch to the page within the SETTINGS
menu.
Vers. 1 du 20/10/16
EN
Page129