Use; Product Details; Technical Specifications - Marmitek SURROUND ANYWHERE 221 Guide Utilisateur

6 Use

The Surround Anywhere 221 has no auto standby mode. If the set is left idle
for an extended period, switch it off like this: always first switch off the
receiver, followed by the transmitter (if necessary). This is to avoid a pop
coming from the speakers. If you want to switch the set back on, always first
switch on the transmitter and then the receiver.

7 Product details

7.1

Technical specifications

Transmitter
Supply voltage
Idle power consumption
Audio transmission method
Transmitter frequency
Connection with receiver
Sample frequency
Audio Input Level (Max)
Transmitter operating range
Weight
Size
Receiver
Supply voltage
Idle power consumption
Output power
Frequency response
Signal-to-noise ratio
Total harmonic distortion
Overall audio latency
Power efficiency
Channel separation
Weight
Size
Operation temperature
In order to continue improving the product, Marmitek reserves the right to change
specifications and/or designs without prior notice.
12
230VAC +10% -15% 50Hz, 5V/600mA
< 0.5W
Digital
2.4GHz
Secure ID Pairing
48KHz
11 V (RMS ) @ 120 ohm
max. 30 m line of sight, max 10 m through
walls and ceilings
100 grams.
120 x 82 x 30 mm
230VAC +10% -15% 50Hz, 18V/3600mA
< 2.5W
2 x 50 W (2 x 25W RMS)
20Hz - 20kHz @ 8 Ohms
80 dB (Transmitter / Amplifier, A-weighted)
< 0.5% @ 1 W
<=20ms
78%
>=50dB
200 grams.
155 x 110 x 35 mm
0 ~ +50°C
© MARMITEK