According to the type of parameter, using the
reduce/increase the value of the same or disable/enable the function.
Once the modification has been performed, press the
Using the
(DOWN) key go to the Exit option and press the
the setting menu. The same procedure must be used to return to the main page.
Working mode menu
Use the
(DOWN) or
Mode
Selects the working mode:
•
Windlass (WND)
•
Capstan (CAP)
Exit
To return to the previous menu
Measurement menu
Use the
(DOWN) or
HC020
WORKING MODE
MODE
EXIT
(UP) key to move around the parameters.
Select with
Change with
Confirm with
Confirm with
MEASURE
RESET M.
UNITS
EXIT
(UP) key to move around the parameters.
(DOWN) and
(UP) keys it is possible to
(ON) key to confirm.
(ON) key again to return to
CAP
MET
23
English
Rev. 03-2021